3
3-47 Printing a Configuration page from the Control Panel
Printing a Configuration page from the Control Panel
The Configuration page lists all the settings in effect from the current Setup. After you
have finished running Setup, print a Configuration page to confirm your settings. The
Configuration page can also be printed from the Command WorkStation. See
page 4-36 for details.
After you make changes to Setup and choose Exit Setup, the ColorPASS reboots. This
allows the ColorPASS to recognize the new settings and display them properly on the
Configuration page. Allow the ColorPASS to reboot and return to Idle before printing
a Configuration page. In particular, the reboot is necessary if you specified the DHCP,
BOOTP, or RARP protocol to obtain an IP address automatically for the ColorPASS.
Post the current Configuration page near the server for quick reference. Users need the
information on this page, such as the current printer default settings.
The other pages you can print from the Control Panel of the ColorPASS or from the
Command WorkStation include the Test Page, Font List, Job Log, Control Panel
Map, and PANTONE, CMY, and RGB color charts. For information on these pages,
see the Job Management Guide.
TO PRINT THE CONFIGURATION PAGE:
1. At the Control Panel, press the Menu button to access the Functions menu.
2. Choose Print Pages.
3. Choose Configuration.
