A SERVICE OF

logo

Open as PDF
next previous
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
• Accounting Method [Radius Server] – To use a RADIUS Server, toggle from None to Radius Server.
• Accounting Mode [Start and Stop] – Select the desired method: Start and Stop, Stop only, or None.
Authentic Radius Server
Figure 7-29. Authentic Radius Server Setting window
This window allows you to set the following features:
• Succession [First ] – Choose the desired RADIUS server to configure: First, Second or Third.
• Radius Server [0.0.0.0] – Set the RADIUS server IP.
• Authentic Port [ 0 ] – Set the RADIUS authentic server(s) UDP port. The default is 1813.
• Accounting Port – Set the RADIUS account server(s) UDP port. The default is 1813.
• Key – Set the key the same as that of the RADIUS server.
• Confirm Key – Confirm the shared key is the same as that of the RADIUS server.
• Accounting Method [Invalid] – This allows you to set the RADIUS server as Valid or Invalid.
118