A SERVICE OF

logo

Open as PDF
next previous
DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
Figure 6-6. Save changes screen
Once the switch configuration settings have been saved to NV-RAM, they become the default settings
for the switch. These settings will be used every time the Switch is rebooted.
Factory Reset
The only way to change the configuration stored in NV-RAM is to save a new configuration using Save
Changes, or to execute a Load Factory Default Configuration from the System Reboot menu (under
Reboot on the main menu). This will clear all settings and restore them to their initial values listed in
the appendix. These are the configuration settings entered at the factory and are the same settings
present when the Switch was purchased.
Figure 6-7. Main menu
Highlight Reboot from the main menu and press Enter.
42