Adjusting the picture
17
• Color—Adjusts the color saturation.
• Tint—Adjusts the image tint.
• Sharpness—Adjusts the sharpness.
• Advanced Video—Lets you adjust the Color Temperature
or Zoom Mode. Lets you turn Noise Reduction, Overscan,
Adaptive Contrast, and Auto Zoom on or off.
3 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Adjusting Advanced Video settings
To adjust the Advanced Video settings:
1 Press MENU. The on-screen menu opens with the Picture menu
displayed.
2 Press or to highlight Advanced Video, then press ENTER
to open the Advanced Video sub menu.
3 Press or to highlight an option, then press or to adjust
the option. You can select:
• Color Temp—Selects the color temperature. You can select
Warm (to enhance the reds), Cool (to enhance the blues), or
Normal.
• Zoom Mode—Selects the aspect ratio of the picture. You
can select Auto (selects the correct aspect ratio
automatically. Available only when Auto Zoom is turned
ON), Normal (selects the correct aspect ratio to match the
source image), Wide (shows a full-screen picture), Zoom
(enlarges the picture but may crop the top and bottom), or
Cinema (stretches the picture at the edges, but maintains a
good aspect ratio at the center of the screen).
• Noise Reduction—Selects the noise reduction mode to
reduce picture noise (snow). You can select Weak, Middle,
Strong, or Off.
• Overscan—Turn this On to adjust the picture’s
reproduction rate when receiving DVI signals in VIDEO
format.
• Adaptive Contrast—Turn this On to optimize the picture
display for a more vivid image.
• Auto Zoom—In TV mode, setting Auto Zoom to On lets you
set the Zoom Mode to Auto.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Adjusting the computer image
To adjust the computer image:
1 Make sure that your TV is in VGA mode. For more information, see
“Selecting the video input source” on page 14.
2 Press MENU. The on-screen menu opens.
3 Press or to highlight Setup, then press . The Setup menu
opens.
4 Press or to highlight VGA Settings, then press . The VGA
settings menu opens.
Color Temp
Adaptive Contrast
Parental Controls
H-Position
V-Position
