Changing channel settings
21
6 Press EXIT to close the menu.
7 To select a channel in the favorite channel list, press FAVORITE,
press or to highlight the channel, then press ENTER.
Adding or changing a channel label
If a channel is not already labeled, you can label the channel to make it
easier to identify. You can also relabel a channel that is already labeled.
To label a channel:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Channel, then press . The Channel
menu opens.
3 Select the signal source of the channel you want to label.
4 Highlight Channel No. , then press or to select the channel
you want to label.
5 Press or to highlight Channel Label.
6 Press ENTER to open channel label screen. The Channel Label
screen opens.
7 Press or to select a character, then press or to move to
the next position. Repeat this step to add more characters.
8 Press MENU to exit to the previous menu.
Checking the DTV signal strength
You can check the DTV signal strength to determine if you need to
adjust your antenna or digital cable input. The higher the signal
strength, the less likely you are to experience picture degradation.
To check the DTV signal strength:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight Channel, then press . The Channel
menu opens. The DTV signal strength is shown at the bottom of
the menu.
3 Press EXIT to close the menu.
