Installing the stand or removing the stand column
5
Removing the stand column
You need to remove the stand column before you wall-mount the TV.
Note: The appearance of the TV may differ from the illustration in this
task.
To remove the stand column:
1 Lay the TV flat (screen down) on the edge of a table or bench.
Make sure that you put a soft cushion or cloth between the table
or bench and the TV.
2 Remove the four screws holding the stand column to the TV, then
remove the stand column.
Installing a wall-mount bracket
If you want to attach the TV to a wall-mount bracket (not provided), you
should first remove the stand pedestal if it is pre-attached.
To install a wall-mount bracket:
1 Lay your TV face down on a table or bench. Make sure that you
put down a soft cushion or cloth so that your TV is not scratched).
2 Remove the four screws that secure the TV to the base.
3 Remove the stand column. See “Removing the stand column” on
page 5.
4 Secure the wall-mount bracket to the back of your TV.
Stand column
