Appendix E IBM ProPrinter 4207, 4208 XL 24 Quick Refernce Appendix E IBM ProPrinter 4207, 4208 XL 24 Quick Refernce
**) only PRINTER TYPE 1 and PRINTER TYPE 2 ***) only PRINTER TYPE 1 and PRINTER TYPE 3
*) only PRINTER TYPE 1 *) only PRINTER TYPE 1
***) only PRINTER TYPE 2 and PRINTER TYPE 3 ****) only PRINTER TYPE 3
E-5 E-6
Table 3 (Cont.): Vertical Form Handling Table 3 (Cont.): Vertical Form Handling
Escape Sequence Mnemonic Function Escape Sequence Mnemonic Function
ESC ] Reverse Line Feed ESC [ ; ; P3 s Paper Exit:
ESC ] > s IF Insert Form P3 = 1 : Paper Exit Front Side *)
Native Command (confirmed by Start/Stop key)
ESC [ > P1 ; P2 ; P3 ; P4 s SPSIF Select Paper Source and Insert (not confirmed by Start/Stop
Native Command Form, Print Gap, Paper Exit, Cut-Mode key, controlled by application)
(any parameter > or P may be skipped, see P3 = 3 : Batch output; rear side
following alternative command sequences);
> = Insert Form ESC [ ; ; ; P4 s Cut Mode On/Off: ****)
ESC [ P1 s SPS Paper Source: P4 = 1 : Cut Mode On
Native Command P1 = 0 : Manual Feed **) P4 = 2 : Cut on actual position
P1 = 1 : ASF, Bin 1 *) (cutting edge is approximate 4 mm above the base of the actual line)
P1 = 2 : ASF, Bin 2 *)
P1 = 3 : ASF, Bin 3 *)
P1 = 6 : upper Tractor ***)
P1 = 7 : Tractor Feed (lower Tractor)
P1 = 8 : ASF, Bins 1 or 2 *)
P1 = 9 : ASF, Bins 2 or 3 *)
P1 = 1 0 : ASF, Bins 1 or 2 or 3 *)
P1 = 1 5 : upper and lower tractor ***)
ESC [ ; P2 s AGC/PCC Procedure:
Native Command P2 = 0 : Automatic Gap Control
P2 = 1 : Print Gap for 1-ply copy
P2 = 2 : Print Gap for 2-ply copies
P2 = 3 : Print Gap for 3-ply copies
P2 = 4 : Print Gap for 4-ply copies
P2 = 5 : Print Gap for 5-ply copies
P2 = 6 : Print Gap for 6-ply copies
Native Command P3 = 0 : Paper Exit Stacker ***)
P3 = 2 : Paper Exit Front Side *)
Native Command P4 = 0 : Cut Mode Off
