●
10-2
NOTES
*1: The details are described in Chapter5 "ADF DOCUMENT SPECIFICATION".
*2 ) The scanning speeds given are the maximum mechanical scanning speeds. During actual scanning
some extra time will be required for data transfer and software processing.
*3 ) The maximum number will differ due to the paper thickness. Refer to Chapter5 "ADF DOCUMENT
SPECIFICATION".
*4 ) Maximum output resolution may vary according to the scan size, and setting (simplex/duplex)
*5 ) fi-475CMP3 (JPEG compression board) must be installed.
*6 ) Both SCSI-2 and the Third Party Slot can not be used at the same time.
*7 ) The Power consumption of the boards should be as follows:
- In the Low Power Mode : Less than 0.35 A
- Without IPC-4D(IMAGE PROCESSING CIRCUIT BOARD) : Less than 1.5 A
- With IPC-4D(IMGGE PROCESSING CIRCUIT BOARD) : Less than 3.0 A
1 Scanner Type ADF (Duplex), Document bed
2 Image sensor CCD x 2 Front/Back
3 Light source White Xenon fluorescent tube x 2 Front/Back
4 Document
Size
Minimum A8 (Portrait)
Maximum A4/Letter/Legal
5 Paper Weight
52 g/m
2
(14 lb) to 127 g/m
2
(34 lb)
Note (*1)
6 Scanning
Speed
Note (*2)
Mono-
chrome
40 pages/min simplex, 80 sides/min duplex
(@200dpi)
Note (*3)
Color
34 pages/min simplex, 48 sides/min duplex
(@150dpi)
7 ADF Capacity
100 sheets (A4, 64 g/m
2
(20 lb))
Note (*3)
8 Optical Resolution 600 dpi
9 Output Res-
olution
Note (*4)
Binary 50 - 800 dpi Standard gradient
is 1 dpi, (multiples
are possible)
Grayscale 50 - 600 dpi Standard gradient
is 1 dpi, (multiples
are possible)
Color 50 - 600 dpi Standard gradient
is 1 dpi, (multiples
are possible)
10 Grayscale level (internal) 1024 levels (10 bits)
11 Halftone Patterns Dither/Error diffusion
12 Other function JPEG compression Note (*5)
13 Interface
Note (*6)
SCSI-2 (SE) Shield-type 50 pin
(pin-type) half-
pitch
Third Party Slot Note (*7)
Basic Product Specification
