xi
Do not open the equipment without good reason.
Always remove the plug from the socket before fitting or
removing optional equipment.
Do not move the equipment alone.
Switch power OFF if the equipment is damaged.
Do not place in wet areas.
The equipment contains high-voltage components, and should not
be dismantled or modified.
Switch the equipment power supply OFF, and remove the plug from
the socket, before fitting or removing optional equipment in
accordance with the specified procedure.
Grip the plug to remove the power cable from the socket.
Never move the equipment alone.
If the equipment is dropped, or covers etc. have been damaged,
switch power supply OFF, remove the plug from the socket, and call
your dealer or maintenance service center.
Do not place the scanner where liquid spills may occur.
