●
7-8
4 Reset of the abrasion counter
When you reset the abrasion counter, you must set it as follows:
1. Press “Next” or “Previous” and let the scanner display Screen 6.
Screen 6
2. At Screen 6;
If you want to reset the abrasion counter, select “Yes” through or button and press . Go to
procedure 3.
If you do not want to reset the abrasion counter, select “No” and press . Finally press to
return.
3. At Screen 7;
If you want to reset the abrasion counter, select “Yes” and press . If you do not want to reset it,
select “No” and press .Press to return.
Screen 7
5 Setting the pick start time
When you set the pick start time, you must set it as follows:
1. Press “Next” or “Previous” and let the scanner display Screen 8.
Screen 8
2. At Screen 8, press to increase the Pick start time or press to decrease the Pick start time. Then
press to activate the setting. Finally press to return.
