Troubleshooting and tips
The notebook stops working
NotebookEnergysavingmode
Cause Troubleshooting
Notebook is in energy saving mode. ► Leave energy saving mode.
An application programme ha s cause
dthe
malfunction.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and b ack
on again).
The battery is dead.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the mains adapter to the
notebook.
The printer does not print
Printerdoesnotp
rint
Cause Troubleshooting
The printer is not sw itched on. ► Make sure that the printer is switched
on and ready for operation (refer to th e
documentation supplied with the printer).
The printer is not connected correctly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whether the correct pri
nter driver is
loaded (refer to the printe
r documentation).
The radio connection to a network does not work
Theradi
oconnectiontoanetworkdoesnotwork
Cause Troubleshooting
The wireless component is disabled.
► Switch the radio component on (see
"
Switch ing the wireless compone nts on and
off", Page 6 9).
The wireless comp onent is enabled. Despite
this, the wireless connection to a n etwork does
not work.
► Check whether the radio connection is
switched on via the software.
► Further information on us
ing the radio
component can be found in
the help files.
104 Fujitsu Technology Solutions
