HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
Internet Service Interface Commands
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Internet Service Interface Commands
10.1 ^IPINIT–Command for Initializing a TCP/UDP
Connection
10.1.1 Syntax
^IPINIT[=<APN>[,<user_name>
[,<password>]]]
<CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>ERROR<CR><LF>
If initialization is performed:
<CR><LF>^IPINIT:<state>,<ip_address>,<AP
N>,
<pri_dns_address>,<sec_dns_address><CR><
LF>
<CR><LF>OK<CR><LF>
If initialization is not performed:
<CR><LF>^IPINIT:0<CR><LF>
<CR><LF>OK<CR><LF>
<CR><LF>^IPINIT:(supported <state>
list)<CR><LF>
<CR><LF>OK<CR><LF>
10.1.2 Interface Description
This command initializes a TCP/UDP connection. After initialization is complete, a
local IP address is obtained, enabling the next step to be performed, for example,
enabling a TCP connection and transmitting UDP data.
In case of using the command without <user_name> and/or <password>, the user
name and password that have been set by running the PPPCFG command are used.
