37
Basic Settings1
This page is for performing basic setting related to the network.
This page can be used during access using AadminB .
● Click [Basic Settings1].
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
Memo:
● You can open the [Basic Settings1] screen without going through Built-in Viewer by entering the
following URL address in the address field of Internet Explorer.
http://192.168.0.2/cgi-bin/x35display.cgi?x35basicmenu1.html
A
B
C
D
Click
A IP Setting For setting the DHCP client function.
Connect VN-X35U to a network environment with a DHCP server
when DHCP is to be enabled. If the DHCP server does not exist
when DHCP is set to AEnableB, VN-X35U will start running with
the 192.168.0.2 IP address and 255.255.255.0 subnet mask in
about 2 minutes after startup.(A Page 27)
B IP Address For setting the IP address of VN-X35U.
C Subnet Mask For setting the subnet mask of VN-X35U.
D Default Gateway For setting the default gateway of VN-X35U
Enter 0.0.0.0 if you do not want to set a default gateway.
E Time Displays the clock time of VN-X35U.
The time transmitted by VN-X35U is recorded in the JPEG
header. Discontinuity may occur in the JPEG header's time
immediately before and after changing the time.
F Time Zone For setting the time zone.
G PC Time to Camera Click the [Set] button to set the time of the computer on VN-X35U.
