A SERVICE OF

logo

Open as PDF
next previous
Chapter 3. TV Setup 43
Initial NetCommand® Setup,
continued
7. Pressthe keysontheTV’sremotecontrol
tohighlightotherkeysonthelist.Repeatsteps4
and5foreachadditionalfunctionyouwishtocontrol
throughNetCommand.
8. Ifthedevice’sremotecontrolhaskeysthatdonot
appearinthelist,youcanassociateuptofourkeys
withthe
F1
through
F4
keys.Forexample,foraDVD
player,assignthe
F1
and
F2
keystotheDVDplayer’s
CHAPTER SKIP FORWARD
and
CHAPTER SKIP BACK
keys.Perform
NetCommandsetupforthe
F
keysthesameasyoudid
forthenamedkeys
.
9. Press
EXIT
tocontinuewithsetupforadditionaldevices.
Additional Setup Using the
NetCommand Menu
UsetheNetCommandmenuatanytimeto:
• SeealistofallconnectionstotheTV.
• SetupTVGuideOnScreen®ormakechangestothe
setup.
• AddNetCommandcontroltoadevice.UsetheLearn
buttontoopentheNetCommandLearnscreenforthe
currentlyselecteddevice.
• Addorremovespecificdevicekeysfrom
NetCommandcontrol.
• AddNetCommandcontroltoanA/Vreceiver.When
theA/Vreceiveristheaudiosource,audiofroma
devicecanbeautomaticallyswitchedtotheA/V
receiverwhenthedeviceisselectedintheTV’sInput
Selectionmenu.
• Assignmeaningfulnamestotheinputiconsinthe
InputSelectionmenu(seechapter5,“TVMenuSet-
tings”).
• ChangetheorderoficonsintheInputSelectionmenu
(seechapter5,“TVMenuSettings”).
ToopentheNetCommandmenu,press
MENU
tofirstopen
theMainmenu,highlighttheNetCommandicon,and
press
ENTER
.Seefigure10.
Figure 10. Additional NetCommand setup options are
accessible through the NetCommand menu.
Review TV Connections
YoucanverifyTVconnectionsduringTVsetuporat
anytimeafterwardusingtheReviewscreen.Inthe
NetCommandmenu,press tohighlightReview
andpress
ENTER
todisplaytheReviewscreen(seefigure
11).
Figure 11. The Review screen lists all TV connections.
IEEE 1394 devices are listed separately on the right.
Set Up TV Guide On Screen®
SetupoftheTVGuideOnScreensystemisoptional.
• ManyfeaturesofTVGuideOnScreenareavail-
ablewithoutNetCommandcontrol.Forexample,
programlistings,programsearches,andprogram
remindersfunctionwithoutNetCommand.
• Forfullfunctionality,youmustsetup
NetCommandcontrolofanydeviceassociated
withTVGuideOnScreen,e.g.,arecordingdevice
ifyouwishtosetuprecordingsthroughTVGuide
OnScreen.
1. HighlighttheGuidebuttonintheNetCommandmenu
andpress
ENTER
todisplayTVGuideOnScreensetup
options.
2. ToenabletheTVGuideOnScreensystem,highlight
theOnbutton.Ifyouwishtodisablethesystem,high-
lighttheOffbutton.