A SERVICE OF

logo

Open as PDF
next previous
Chapter 5. TV Menu Settings 63
To Replace One Device with Another on an Input Jack
1. Disconnectthedeviceyouwishtoremovefromthe
TV.
2. Connectthenewdevicetothevacatedjack.
3. OpentheInputNamemenufromtheNetCommand
menu.
4. Selectadevicenamefromthelistfortheinput.
5. OpentheReviewscreenandconfirmthechange.
To Remove the Icon for an HDMI Device
WhenyoudisconnectanHDMIdevice,theiconremainsin
theInputSelectionmenuuntilyouchoosetoremoveit.
1. IntheInputNamemenu(seefigure4),highlightthe
boxforthedisconnectedHDMIinput.
2. Press toselectOff.
3. Press
MENU
toreturntotheNetCommandmenuor
press
EXIT
tocloseallmenus.
Icon Order Menu
(no NetCommand setup required)
TheIconOrdermenuallowsyoutorearrangethedevice
iconsthatappearintheInputSelectionmenu.Change
thesequencetoputfrequentlyusediconsatthestartof
thelist.Seefigures3and5.
To change the icon order
1. Press tohighlighttheicontobemovedand
thenpress
ENTER
.
2. Press todragtheicontothedesiredposi-
tion.Press
ENTER
tosetthenewposition.
Figure 5. Icon Order menu
NetCommand Menu, continued