Copying
- 52 -
To select the resolution
Select the desired resolution according to the
type of document.
– “FINE”: For printed or typewritten originals
with small printing.
– “SUPER FINE”: For originals with very small
printing.
– “PHOTO”: For originals containing
photographs, shaded drawings, etc.
L
If you select “STANDARD”, copying will be
done using “FINE” mode.
L
You can also select the resolution after
pressing
{
COPY START
}
in step 3. Press
{
RESOLUTION
}
repeatedly to select the
desired setting.
To stop copying
Press
{
STOP
}
.
To enlarge a document
The unit can enlarge copies to as much as 200%
of the original by changing the enlargement rate
5% at a time.
After step 3 on page 51, press
{+}
repeatedly to
select the desired enlargement rate, then press
{
COPY START
}
.
L
When using the auto document feeder, the
unit will only enlarge the centre of the upper
part of the document. To make an enlarged
copy of the bottom of the document, turn the
document around, and then make a copy.
Example: 150% enlarged copy
L
When using the scanner glass, the unit will
only enlarge the right bottom corner of the
document starting from the
T
mark on the
unit.
Example: 150% enlarged copy
To reduce a document
The unit can reduce copies to as little as 50% of
the original by changing the reduction rate 5% at
a time.
After step 3 on page 51, press
{-}
repeatedly to
select the desired reduction rate, then press
{
COPY START
}
.
Example: 70% reduced copy
AB
CD
AB
CD
Original document Enlarged copy
AB
CD
AB
CD
Scanner glass
Original document Enlarged copy
AB
CD
AB
CD
Original document Reduced copy
