Features Summary
- 63 -
Basic features
How to set the basic features
1
Press
{
MENU
}
.
2
Press
{<}
or
{>}
until the desired feature is displayed.
3
Press
{+}
or
{-}
until the desired setting is displayed.
4
Press
{
SET
}
.
5
Press
{
MENU
}
.
Note:
L
Step 3 may be slightly different depending on the feature.
L
See page 62 for more details.
Programming table
For the settings column, the bold type indicates the default setting.
Code Feature & Display Settings How the unit operates
#01 Setting the date and time
SET DATE & TIME
PRESS SET
See page 18 for details.
#02 Setting your logo
YOUR LOGO
PRESS SET
See page 19 for details.
#03 Setting your facsimile telephone
number
YOUR FAX NO.
PRESS SET
See page 21 for details.
#04 Printing the sending report
SENDING REPORT
=ERROR [±]
To print and check the sending report
for fax transmission results (page 33).
ERROR
ON
OFF
“ERROR”: The sending report will
be printed only when fax
transmission fails.
“ON”: The sending report will be
printed out after every
transmission.
#06 Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=2 [±]
To change the number of rings before
the unit answers a call in FAX ONLY
mode.
1, 2, 3, 4, 5, 6,
7, 8, 9
If you are using the unit with an
answering machine, set to more
than 4 (page 46).
