Features Summary
- 67 -
#44 Setting the memory reception alert
RECEIVE ALERT
=ON [±]
To alert you with a beeping sound
when a document which has been
received is stored into memory due to
some existing problem.
ON
OFF
If you are alerted by a slow
beeping sound, clear the printing
problem and make sure the unit is
supplied with enough paper to
print the stored document. The
beeps will stop.
#58 Setting the original mode
ORIGINAL
=NORMAL [±]
To send or copy a document with faint
or dark writing, set this feature before
starting transmission or copying.
NORMAL
LIGHT
DARKER
“NORMAL”: Used for normal
writing.
“LIGHT”: Used for faint writing.
“DARKER”: Used for dark writing.
L
This feature will return to the
normal mode after
transmission or copying.
#68 Setting the Error Correction Mode
(ECM)
ECM SELECTION
=ON [±]
To send a fax even if there is static
interference on the telephone line.
ON
OFF
This feature is available when the
transmitting/receiving stations are
ECM compatible.
#76 Setting the connecting tone
CONNECTING TONE
=ON [±]
If you often have trouble when
sending a fax, this feature allows you
to hear connecting tones: fax tone,
ring back tone and busy tone.
ON
OFF
You can confirm the status of the
other party’s machine.
L
If the ring back tone continues,
the other party’s machine may
not be a facsimile or may have
run out of paper. Check with
the other party.
L
The connecting tone volume
cannot be adjusted.
#79 Saving on toner consumption
TONER SAVE
=OFF [±]
ON
OFF
“ON”: The toner cartridge will last
longer.
L
This feature may lower the print
quality.
#80 Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO [±]
YES
NO
1. Follow steps 1 and 2 on page
65.
2. Press
{+}
or
{-}
to select
“YES”.
3. Press
{
SET
}
.
4. Press
{
SET
}
again.
5. Press
{
MENU
}
.
Code Feature & Display Settings How the unit operates
