Features Summary
- 66 -
#25 Sending a fax at a specific time
DELAYED SEND
=OFF [±]
This feature allows you to take
advantage of low-cost calling hours
offered by your telephone company.
L
The setting can be reserved to
take place up to 24 hours in
advance.
ON
OFF
To send a document:
1. Insert the document into the
auto document feeder.
2.
Follow steps 1 and 2 on
page 65
.
3.
Press
{+}
or
{-}
to select “ON”.
4. Press
{
SET
}
.
5. Enter the fax number.
6. Press
{
SET
}
.
7. Enter the transmission start
time.
Press
{*}
to select “AM” or
“PM”.
8. Press
{
SET
}
.
9. Press
{
MENU
}
.
L
To cancel after programming,
press
{
STOP
}
then
{
SET
}
.
#26 Setting the Caller ID list to print
automatically
AUTO CALL. LIST
=ON [±]
ON
OFF
“ON”: The unit will print the Caller
ID list automatically after every 30
new calls (page 28).
#27 Setting the black list function
BLACK LIST
=OFF [±]
ON
OFF
See page 49 for details.
#31 Setting the ring pattern detection
RING DETECTION
=OFF [±]
ON
OFF
See page 50 for details.
#37 Receiving other size documents
AUTO REDUCTION
=ON [±]
To receive a fax document that is
longer than your recording paper.
ON
OFF
“ON”:
The unit will fit a received
document onto your recording paper.
“OFF”: The unit will print the
original size.
#39 Changing the display contrast
LCD CONTRAST
=NORMAL [±]
NORMAL
DARKER
“NORMAL”: For normal contrast
“DARKER”: Used when the
display contrast is too light.
#41 Changing the fax activation code
FAX ACTIVATION
=ON [±]
If you use an extension telephone
and wish to use it to receive a fax,
activate this feature, and enter the
code (page 48).
L
This code is also used to receive a
voice message and a fax in the
same call (page 47).
ON/
@@@
9
OFF
1. Follow steps 1 and 2 on page
65.
2. Press
{+}
or
{-}
to select
“ON”.
3. Press
{
SET
}
.
4. Enter your code from 2 to 4
digits, using 0–9, and
*
.
5. Press
{
SET
}
.
6. Press
{
MENU
}
.
L
Do not enter “0000”.
Code Feature & Display Settings How the unit operates