42
Basic Transmission Settings
Halftone
The Halftone setting is useful when sending photographs or illustrations with gray tones. Your machine is
preset to HALFTONE = Off.
Press HALFTONE to:
HALFTONE = Off HALFTONE = On
HALFTONE
HALFTONE
When you select HALFTONE, your machine will automatically select Fine Resolution.
Verification Stamp
The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
successfully transmitted page with a small mark.
Press STAMP to:
STAMP = Off STAMP = On
STAMPSTAMP
1. When you store a document in memory, the Verification Stamp will stamp on the document if it is
successfully stored in memory. In this case the Verification Stamp is not a confirmation that the
document was successfully transmitted. If you wish to disable the use of the Verification Stamp
when storing document in memory, change the setting of Fax Parameter No. 28, see page 37.
2. To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04, see
page 35.
04002000002
04002020003
04002050008
Note:
04002070008
04002020004
04002050004
Note:
04002070007
04002070005
