62
Receiving Documents
Fax / Tel Auto Switching Mode
When your machine is set to this mode, your machine will switch to document reception or voice
communication automatically.
Setting the Fax / Tel Auto Switching Mode
Change Fax Parameter No. 15 (IN MODE) to 2: Fax / Tel SW. (see page 36)
OUT
Confirm that the lamp is OFF and the display is as shown
to the right.
Operation of Fax / Tel Auto Switching Mode
Your machine will answer the call when a call is received, then distinguish whether it is a
voice or fax call.
Your machine begins to receive the
documents.
Your machine begins to signal
(ringing) through the machine’s
speaker for your attention. (see Note)
2a
2b
Lift the handset of the External
Telephone and press .
3b
If it is a Fax call, If it is a Voice call,
Begin conversation.
4b
STOP
1. The length of time the machine signals can be changed by Fax Parameter No.18 (OP CALL TIMER)
(see page 36).
2. To adjust the Ringer Volume refer to page 23.
04004000002
04004010005
04004040005
04004020003
04004060035
04004060036
04004020004
04004060015
04004060048
Note:
04004070006
04004070017
SEP-12-1999 15:00
RCV MODE=FAX/TEL 00%
1
2
1
