60
Receiving Documents
Reception Modes
You can select one of the four modes as shown below.
Conditions Suggested Reception Mode Settings
Telephone Mode
(IN Mode)
ࠡ Fax Parameter No. 15 set
to 1 : Tel
You normally receive
only voice calls.
You can answer the incoming call via an External
Telephone (Optional). If you receive a fax calling
signal, simply press START to receive manually.
(see page 61)
ࠢ
OUT
Lamp : OFF
Fax / Tel Auto Switching Mode
(IN Mode)
ࠡ Fax Parameter No. 15 set
to 2 : Fax / Tel SW.
You receive both voice
and fax calls.
Unit will answer the incoming call then
distinguishes whether it is voice or fax call. If it is
a fax call, the unit will receive automatically. if it is
a voice call, the unit will signal (rings) through the
speaker for your attention. (see page 62)
ࠢ
OUT
Lamp : OFF
Fax Mode
(OUT Mode)
ࠡ Fax Parameter No. 16 set
to 1 : Fax
fax calls only.
Unit will receive the document automatically. All
incoming calls (including a voice call) are
answered by the fax machine. (see page 63)
Lamp : ON
OUT
You receive both voice
TAM Interface Mode
(OUT Mode)
ࠡ Fax Parameter No. 16 set
to 2 : TAM I/F.
and fax calls. And a
Telephone Answering
Machine (TAM) is
connected.
The TAM answers the incoming call. During that
time, the unit also monitors whether it is a voice
call, the TAM continues to operate. If it is a fax
call, the unit will automatically switch the line to
fax and begin receiving document. (see page 64)
ࠢ
Lamp : ON
OUT
1. Depending on the model of the Telephone Answering Machine (TAM) that is connected, some of the
features may not be compatible with your fax machine operating in the TAM Interface mode.
2. If you are using the ”Distinctive Ring Service” provided by your local telephone company, please note
that the ring pattern for your fax number must match with the setting of Fax Parameter No. 36 (RING
PATTERN DETECT). (see page 37)
If the setting does not match with the ring pattern, your machine will not receive a document
automatically and the telephone will continue to ring.
Furthermore, if your TAM does not support the ”Distinctive Ring Detector” service, it may not function
properly in TAM Interface.
04004000002
04004010003
04004040003
04004080002
Note:
04004070001
04004070002
