39
CONTROL CAMERAS
When displaying live images, the following camera controls
are possible.
• Panning/tilting: Moves a camera horizontally/vertically.
• Zooming: Zooms in/out images.
• Focus: Adjusts the focus.
• Iris: Adjusts the iris of the lens.
• Preset action: Moves a camera to the preset position
registered in advance.
• Auto pan: Pans a camera automatically from the
start point to the end point registered
in advance.
Notes:
• Controlling cameras is possible only when displaying
images on a single screen.
• Depending on models of the connected cameras, it
may be impossible to control the camera or some func-
tions may be not available.
• Refer to page xx for descriptions of how to display and
perform the settings with the settings menu of the cam-
era from this unit.
■ Panning/Tilting
Moves a camera horizontally/vertically.
z Press the PAN/TILT button.
The PAN/TILT indicator will light.
x Use the arrows button to adjust
vertical or horizontal position.
Camera will move slowly by pressing the arrows button
while holding the SLOW button down.
■ Zoom
Zooms in/out on images. Depending on models of the con-
nected cameras, the image size for the respective zooming
portion may be different. For further information, refer to the
operating instruction for the camera.
z Press the ZOOM/FOCUS button.
The ZOOM/FOCUS indicator will light.
x Use the arrows button (DC) to
zoom the displayed image.
Press the arrows button downward (D) to zoom out and
upward (C) to zoom in.
■ Focus
Adjusts the focus. The auto focus function is available.
z Press the FOCUS button.
The ZOOM/FOCUS indicator will light.
x Use the arrows button (AB) to
adjust the focus.
Auto focus is available by pressing the SET button.
