88
CONTINUE: When the available disk space has run
out, old data will be overwritten by new data. In this
case, the oldest data is the first to be overwritten.
STOP: When the available disk space has run out,
recording and copying will be canceled.
t [Disk Capacity] Set actions to be
taken when the available disk space
is riunning out
Select an action from the followings to be taken when
the available space of the built-in hard disk (normal
recording area, event recording area, copy area) or the
external recording device (DVD-RAM, CD-R or DVD-R
disk drive) connected to the copy port (COPY1,
COPY2) reaches the specified level.
The setting range is between 1% and 10% (in 1% step).
The warning will not be issued when OFF is selected.
Important:
When "CONTINUE" is selected for "Disk End Mode",
warning will not be issued.
y [Data Delete] Delete image data on
the hard disk
Delete image data on the built-in hard disk.
Auto deletion and manual deletion are available to
delete image data.
It is also possible to initialize (format) a DVD-RAM disk
with this menu.
● Auto Delete
It is possible to delete recorded images automatically when
the set days have passed from the day the image was
recorded. Refer to a system administrator for further infor-
mation.
Available days for the auto delete function are as follows.
Auto delete function will be not work when OFF is selected.
OFF/1DAY/2DAYS/3DAYS/4DAYS/5DAYS/6DAYS/
7DAYS/8DAYS/9DAYS/10DAYS/14DAYS/30DAYS/45DAYS/
60DAYS/90DAYS/120DAYS/150DAYS/180DAYS
● Manual Delete for Normal Recording Area
By setting time and date, images in the normal recording
area of the hard disk that had been recorded until a day
before the set time and date will be deleted.
Enter 4-digit number for year when entering time and date.
● Manual Delete for Event Recording Area
By setting time and date, images in the event recording
area of the hard disk that had been recorded until a day
before the set time and date will be deleted.
● Disc Format of DVD
Initialize (format) a DVD-RAM disk in the DVD-RAM drive
connected to the copy port.
u [Maintenance] Replace the hard disk
drive
Use this menu when replacing the hard disk drive.
By following the displayed instructions, it will be possi-
ble to replace the hard disk drive without turning off the
power of the unit.
Refer to page XX for further information about the
replacement of the hard disk.
Disk Info.
Version Info.
Disk Info.
Version Info.
Disk Info.
Version Info.
No. Time&Date Event
