
set snmp trap Set snmp trap receive host
set spantree disable Disable spanning tree
3.5.2.6 Show command
Show command is to display the current parameter of the switch functions. The follow table lists the show
commands and the equivalent usages.
Command Description
show channel Show channel information
show console-info Show console-info
show dot1x local-userInfo Show dot1x local user information
show dot1x state Show dot1x information
show igmp-snooping group number Show igmp-snooping group-limit
show igmp-snooping group policy Show igmp-snooping group policy
show igmp-snooping info Show igmp snooping information
show igmp-snooping policy deny Show igmp snooping policy deny
show igmp-snooping Show igmp snooping information
show ip http server Show http server information
show ip telnet server Show telnet server information
show ipstack info Show ipstack info
show mirror Show mirror information
show multicast router Show multicast router port information
show port counter Show port counter information
show port dot1x Show dot1x information
show port mac-learning Show MACs on certain port
show port rate-shaping Show port ingress and egress rate-shaping
show port spantree Show spantree information on ports
show port state Show port infomation
show port storm-limit Show port storm limit mode and rate
show qos map cos-queue-map Show qos map cos-queue-map
show qos map dot1p-cos-map Show qos map cos-queue-map
show qos map mac-cos-map Show qos map mac-cos-map
show qos map port-cos-map Show each port's cos
show qos map vlan-cos-map Show qos map vlan-cos-map
show qos queue egress-policy Show qos queue egress-policy
show radius Show radius information
show security MAC-aging Show MAC aging time
show security filter-MAC Show MAC filter entry