171
Changing Camera Settings
5
When functions are assigned to the ADJ./OK button, you can
display various shooting setting screens with fewer button
operations and without displaying the shooting menu.
You can use [ADJ Btn. Set.1] to [ADJ Btn. Set.4] to assign camera
functions that can be activated by pressing the ADJ./OK button.
For information on how to use the ADJ. mode, see P.66.
To assign a function to [ADJ Btn. Set.1] to [ADJ Btn. Set.4], follow
the steps below.
1
Display the setup menu.
• For the operating procedure, see P.154.
2
Press the ADJ./OK button " to select [ADJ Btn. Set.1],
[ADJ Btn. Set.2], [ADJ Btn. Set.3], or [ADJ Btn. Set.4],
and then press the button $.
3
Press the button !" to select
the desired setting.
4
Press the ADJ./OK button.
Assigning Functions to the ADJ./OK
Button (ADJ Btn. Set.)
Available Settings Refer to
Off -
Expo. Cmp *Default setting for [ADJ Btn. Set.1] P.109
Wht. Bal. *Default setting for [ADJ Btn. Set.2] P.111
ISO *Default setting for [ADJ Btn. Set.3] P.114
Quality (Pic Quality/Size) *Default setting for [ADJ Btn. Set.4] P.83
Focus P.85
Image P.93
Expo. Met. P.88
Cont Mode P.89
Auto BKT P.96
Flash Comp P.95
Min. Aper. P.103
