If you are using the camera for the first time, read this section.
53
Note ---------------------------------------------------------------------------------------------------
Setting your favorite image files to [Flag Function Setting] on the playback menu allows
you to easily display these files. (GP.123)
Checking the image in shooting mode----------------------------------------------------
In shooting mode, immediately after you take a still image, the still image is displayed
on the screen for a moment so you can check it. You can change the image display
time using [LCD Confirm.] on the setup menu (GP.168).
When [LCD Confirm.] is set to [Hold], the image remains displayed until the next time
you half-press the shutter release button. When [LCD Confirm.] is set to [Hold], the
displayed image can also be enlarged or deleted. (GP.55, 56)
Turning on the camera in playback mode------------------------------------------------
When the camera is off, pressing and holding the 6 (Playback) button turns the
camera on. (The camera starts up in playback mode.)
When the camera has been turned on with the 6 button, pressing the 6 button
again switches playback mode to shooting mode.
Where images are played back from-------------------------------------------------------
When no SD memory card is loaded, the camera plays back from the internal memory.
When an SD memory card is loaded, it plays back from the SD memory card.
