Appendix
142
8
Parallel I/F board has a problem.
An error has occurred in the
parallel interface board.
Contact your sales or service
representative.
PDF file error. Cannot print. The PDF file cannot be printed
due to syntax error.
Check the PDF file for errors.
PDF file printing is not al-
lowed. Cannot print.
An attempt was made to print
a restricted document.
The PDF file cannot be printed.
PDF password is incorrect.
Cannot print.
The entered password does
not match that set for printing
encrypted documents.
Enter the correct password.
Print Overrun The image data has been
thinned out due to image com-
pression.
Increase memory capacity.
When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.
Punch has been cancelled. Punch has been canceled. Check the paper feed direc-
tion, paper orientation, and
punch position.
Staple has been cancelled. Staple printing has been can-
celed.
Check the paper feed direc-
tion, paper orientation and
stapling position.
The print job has been can-
celled because capture file(s)
could not be stored: Exceeded
max. memory.
An HDD overflow error has
occurred when storing cap-
ture file(s).
Delete some files stored in the
Document Server or reduce
the size of files to be printed.
The print job has been can-
celled because capture file(s)
could not be stored: Exceeded
max. number of files.
The maximum number of
stored capture files has been
exceeded.
Delete some files stored in the
Document Server.
The print job has been can-
celled because capture file(s)
could not be stored: Exceeded
max. number of pages per
file.
The maximum number of
stored capture pages has been
exceeded.
Delete some files stored in the
Document Server or reduce
the size of files to be printed.
DToner is almost empty. The toner has almost run out. Replace the toner cartridge
with a new one.
Turn the main power switch
off then on.
The IEEE 802.11b interface
unit may have come off, or an
error may have occurred in the
IEEE 802.11b interface unit.
Turn off the main power
switch, and check the IEEE
802.11b interface unit is in-
stalled correctly. If the mes-
sage appears again, contact
your sales or service repre-
sentative.
USB has a problem. An error has occurred in the
USB interface.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Messages/Second messages Causes Solutions
VenusC1GB-Printer-F8_FM.book Page 142 Tuesday, March 29, 2005 4:51 PM
