Settings
235
• Summary after call: Activate this setting if you want
the phone to briefly display the duration of each call.
•
Speed dialling: When this setting is activated, the
numbers assigned to the speed dialling keys to
can be dialled by pressing and holding the key.
See also "Assigning speed dialling keys" on page 60.
•
Connect tone: Select On, and you can hear a tone
when your call is connected to the system.
•Anykey answer: When this setting is activated, you
can answer an incoming call by briefly pressing any
key, except and .
•
Active slider: When this setting is activated, you can
answer an incoming call by opening the phone.
•
Msg. alert during call: When this setting is activated,
the phone alerts you to a new message during a call.
•
Side key: Depending on this setting, the phone mutes
the call ringer or rejects an incoming call when you
press and hold .
• Line in use (network service): This setting is shown
only if the SIM card supports two subscriber numbers,
that is two phone lines. Select which phone line (line 1
or line 2) you want to use for making calls and sending
short messages. Calls on both lines can be answered,
irrespective of the selected line.
Note
: You will not be able to make calls if you select Line 2
and have not subscribed to this network service. To
prevent line selection, select
Line change
→
Disable
if
supported by your SIM card.
