Making a 10-4 Call by Entering a Number
1. From standby mode, enter the 10-4 number you want to dial.
2. Press to place the 10-4 call. Continue holding to take the
floor and speak.
ᮣ
The contact’s name appears if there is a matched number in
your 10-4 List.
3. Continue with the 10-4 call, pressing and holding to speak
and releasing it to allow others to reply.
4. When the call is finished, press .
– or –
1. Press (right softkey) or press to access the 10-4 List.
2. Press (left softkey), highlight Enter 10-4# and press .
3. Enter the 10-4 number you want to dial.
4. Follow steps 2-4 above.
Missed Call Notification for 10-4 Calls
When an incoming 10-4 Call is not answered, the Missed Call
Notification is displayed on your screen.
To call the last Missed 10-4 Call:
ᮣ
Simply press and hold while the Missed Call Notification is
displayed. (Continue with the 10-4 call as described
previously.)
To display the Missed 10-4 Call Log:
ᮣ
Press (right softkey). To call the entry, highlight the
entry you want to call, and press and hold . (Continue with
the 10-4 call as described previously.)
Note: When you display Missed Calls entries, you will see the icon
next to the name. The icon will remain until you make or receive
a 10-4 call to or from the entry. The icon appears next to the new
missed call entry.
View
Go to
10-4
95
Making a 10-4 Call (Group Call)
You can make a 10-4 call to all members in a Group entry, which
you have in your 10-4 List. You can communicate with up to five
members at a time.
1. Press (right softkey) or press to access the 10-4 List.
2. Press (left softkey),highlight the list from which you want
to make a Group call (Company Groups or Personal Groups), and
press .
3. Highlight the group you want to call, and press and hold to
place the call and take the floor. (You will see
10-4 calling... and Connecting... followed by “You have floor.”
Continue with the 10-4 call as described previously.)
ᮣ
To display a group member’s details, press , highlight your
desired group member, then press (left softkey) during
step 3 above. Press to make a 10-4 call to the member.
ᮣ
If one of the group members takes the floor, you will see the
member’s name and 10-4 number on the display. The phone
beeps if you press the 10-4 button when another contact has
the floor.
4. When the call is finished, press .
Tip: You can also make a Group Call after checking the group member.
Press to display group members, highlight
<Call Group> and press
and hold during step 3 above.
View
Go to
10-4
94
