24
ENGLISH
While displaying “SET MEMO”, check
the result of each adjustment.
6
• Each time this button is pressed, the result changes
as follows:
Example)
FRONT L CENTER L ---- FRONT L 10(ft)
SUB-W Y FC 80Hz ---- FRONT R 10(ft)
• You cannot check the channel level results.
To check the channel level results, perform the auto
speaker setup procedure, using the OSD menu setting
procedure.(For details, refer to “When selecting the
AUTO SPEAKER SETUP” on page 42.)
• If the results are not satisfactory, set the speaker
setup manually.(For details, refer to “SETTING THE
SPEAKER SETUP MANUALLY” on page 20.)
Confirm the results.
7
• Then “COMPLETE” is displayed and the results are
memorized.
