42
ENGLISH
Press the CURSOR UP()/DOWN()
buttons to select the AUTO SPEAKER
SETUP, then press the ENTER button.
1
Press the CURSOR UP()/DOWN()/
LEFT()/RIGHT() buttons to specify the
setting condition according to the number of
speakers installed and speakers’ frequency
characteristics.
2
• After you have installed this receiver and connected all the components, you should adjust the speaker settings for the
optimum sound acoustics according to your environment and speaker layout.
• Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the
speaker settings, too.
Note:
• Because the microphone for Auto Speaker Setup is designed for use
with this receiver, to use the auto speaker setup function, do not use a
microphone other than the one supplied with this receiver.
SETTING THE SPEAKER SETUP
When selecting the AUTO SPEAKER SETUP
• Auto Speaker Setup lets you avoid troublesome listening-based speaker setup and achieve good surround sound.
You should connect the supplied microphone to the SETUP MIC jack so that this receiver can analyze the information from a
series of test tones emitted from speakers and can adjust the size, distance and sound level of each speaker automatically.
• If you want to personalize your speaker setup and channel level setup by making the settings manually, perform the “When
selecting the MANUAL SPEAKER SETUP” procedure on page 43, “Adjusting each channel level with test tone” procedure
on page 32 and “Adjusting the current channel level”on page 33.
• To specify the layout of the installed speakers, press the
CURSOR UP() or DOWN() button.
• To specify the crossover frequency, press the CURSOR
LEFT() button.
You can specify the crossover frequency with the range of
40~130 Hz in 10 Hz intervals.
• To specify the subwoofer, press the CURSOR RIGHT()
button.
Preparations
1. Connect the supplied microphone to the SETUP MIC
jack on the rear panel,(For details, refer to
“CONNECTING MICROPHONE” on page 10)
2. Place the microphone on a flat level surface at your
normal listening position.
• If possible, use a tripod, etc. to attach the microphone
at the same height as your ears would be when you
are seated in your listening position.
• Ensure there are no obstacles between the speakers
and the microphone.
