LISTENING TO RADIO BROADCASTS
Presetting radio stations
Auto tuning
• Each time this button is pressed, the mode changes
as follows;
Auto tuning mode Manual tuning mode
(“AUTO” lights up) (No indication)
Preset tuning mode(“PRESET” lights up)
• The tuner will now search until a station of sufficient
strength has been found. The display shows the tuned
frequency and “TUNED”.
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
• When pressing the TUNE +/- buttons for more than
0.5 second on the remote control, you need not select
the auto tuning mode on step .
• Manual tuning is useful when you already know the
frequency of the desired station.
• Select the manual tuning mode performing the steps
to in “Auto tuning” procedure and press the
TUNING/PRESET /or TUNE +/- buttons
repeatedly until the right frequency has been
reached.
• When pressing the TUNE +/- buttons repeatedly on
the remote control, you need not select the manual
tuning mode on step in “Auto tuning” procedure.
• You can store up to 30 preferred stations in the memory.
• “MEM” is flickering for several seconds.
Manual tuning
• Each time this button is pressed, the band is changed
to FM or AM.
• When pressing the BAND button without selecting
the TUNER, the tuner will be selected automatically.
Select the tuner.
1
Select the auto tuning mode.
3
Select the desired band.
2
Press the TUNING/PRESET buttons
briefly or press the TUNE +/- buttons for
more than 0.5 second.
4
Tune in the desired station with auto or
manual tuning.
1
Press the MEMORY/ENTER button.
2
