A SERVICE OF

logo

Open as PDF
next previous
78
3.SETTING OF BASIC COPY MODES
2.Enlargement and Reduction Copying (Cont.)
3
3
Press the button representing the desired copy paper size.
• The copy paper size can also be set by pressing the drawer button on the touch panel.
4
Press the [AMS] button.
5
Place the original(s).
• When the original is placed, the equipment detects the original size, then computes and displays the most
appropriate reproduction ratio for the specified copy paper size.
• If “Change direction of original” appears, make the change accordingly.
• Set other copy modes as required.
6
Press the [START] button.
Specifying both original size and copy size separately
1
Place paper in the drawer(s).
2
Place the original(s).