A SERVICE OF

logo

24
Connecting to a satellite system
Choose one of the following according to your type of satellite receiver.
Connections
Satellite receiver
Satellite antenna
Satellite
receiver
Satellite antenna
Video output
IN
OUT
Audio outputs
RF IN
(
FROM ANT.
)
RF OUT
(
TO TV
)
VHF / UHF
VIDEO
S-VIDEO
IR
VIDEO
S-VIDEO
CHANNEL
CHANGE
INPUT1
INPUT3
HDMI OUTPUT
3CH
4CH
R L VIDEO
S-VIDEO
RL
IR
VIDEO
S-VIDEO
C
C
DIGITAL AUDIO
OUTPUT
BITSTREAM/PCM
OPTICAL
R L VIDEO
S-VIDEO
YP
B
P
R
INPUT1
COMPONENT OUTPUT
OUTPUT
INPUT3
HDMI OUTPUT
When the satellite receiver does not have audio/
video outputs
1 Connect a satellite antenna to the satellite receiver.
2 Connect the RF IN (FROM ANT.) terminal on the
recorder and the RF OUT terminal of the satellite
receiver.
3 Connect the RF OUT (TO TV) terminal on the recorder
and the antenna input connector of the TV.
You will need to:
set Cable Box/DBS of Set Top Box setting to
C.Box.
page 42
set Select Input of Set Top Box settingto 3CH or
4CH.
page 42
You can control satellite channels from the recorder.
Perform the below.
1) Connect the supplied IR cable to the CHANNEL
CHANGE IR jack of the recorder.
page 25
2) Set IR control of Set Top Box setting to On.
page 42
When the satellite system has audio/video outputs
1 Connect a satellite antenna to the satellite system.
2 Connect the INPUT1 or INPUT3 (VIDEO/L/R) jacks on
the recorder and the audio/video output jacks of the
satellite system.
3 Connect the OUTPUT (VIDEO/L/R) jacks on the
recorder and the audio/video input jacks of the TV.
4 Connect the RF OUT (TO TV) terminal on the recorder
and the antenna input connector of the TV.
You will need to:
set Cable Box/DBS of Set Top Box setting to
C.Box.
page 42
set Select Input of Set Top Box setting to Line1.
page 42
You can control satellite channels from the recorder.
Perform the below.
1) Connect the supplied IR cable to the CHANNEL
CHANGE IR jack of the recorder.
page 25
2) Set IR control of Set Top Box setting to On.
page 42
RD-XS52SU/SC_Inst_E_p19-30 04.8.31, 13:0324