28
RF IN
(
FROM ANT.
)
RF OUT
(
TO TV
)
VHF / UHF
R L VIDEO
S-VIDEO
RL
IR
VIDEO
S-VIDEO
CHANNEL
CHANGE
DIGITAL AUDIO
OUTPUT
BITSTREAM/PCM
OPTICAL
RLVIDEO
S-VIDEO
YP
B
P
R
INPUT1
COMPONENT OUTPUT
OUTPUT
INPUT3
HDMI OUTPUT
Connecting to a TV equipped with component video inputs
If your TV has component video inputs, you can obtain pictures in better quality.
Connections
• Make the following setting.
On-screen display
Select
Page
“Audio out select” page 48
Component video outputs/inputs
Some TVs or monitors are equipped with component
video inputs. Connecting to these inputs allows you to
enjoy higher quality picture playback.
Actual labels for component video inputs may vary
depending on the TV manufacturer. (ex.Y, R-Y, R-B or
Y, C
B, CR)
In some TVs or monitors, the color levels of the
playback picture may be reduced slightly or the tint
may change. In such a case, adjust the TV or monitor
for optimum performance.
Notes
• Refer to the owner’s manual for the TV to be connected to this recorder for more information concerning an audio system.
• If you place the recorder near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the recorder
away from the tuner and radio.
• The output sound of the recorder has a wide dynamic range. Be sure to adjust the audio amplifier’s volume to a moderate
listening level. Otherwise, the speakers and your hearing may be damaged by sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the recorder’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
• PROG/HDMI button is not available during the operations below.
- All HDD title delete, HDD format, DVD-RAM physical format, DVD format, TIME SLIP (Pause TV/Chase Play), Rate
conversion dubbing (Only when copying is in progress.), DVD-Video creation (EDIT MENU) (Only when copying is in
progress.)
(PROG/HDMI button may not be available during some other operations either.)
To audio inputs of the
amplifier
To P
R VIDEO OUT
(white)(red)
(white)(red)
To P
B VIDEO OUT
To Y VIDEO OUT
To Y video input
To P
B video input
To P
R video input
TV or monitor equipped with
component video (INTERLACED/
PROGRESSIVE) inputs
Audio cable
(not supplied)
Video cable
(not supplied)
PROG/HDMI
“Analog 2ch”
Press
To switch the output signal (Progressive/Interlaced)
Press PROG/HDMI button to change the
video output signals (progressive and
interlace) from COMPONENT OUTPUT jacks.
Change the output signals as shown on the
HDMI indicator on the front panel.
HDMI indicator Video output signal
illuminates “ 1080i” 480p (progressive)
illuminates “ 720p” 480p (progressive)
illuminates “ 480p” 480p (progressive)
off 480i (interlace)
Press
Press
Press
RD-XS52SU/SC_Inst_E_p19-30 04.9.1, 10:1328
