VX-8R OPERATING MANUAL144
SET MODE
SET MODE ITEM 14: BELL RINGER
Function: Selects the number of Bell ringer repetitions.
Available Values: OFF / 1Time ~ 20Times / CONTINUOUS
Default: 1Time
SET MODE ITEM 15: BELL SELECT
Function: Enables/Disables the Bell ringer function and its sound selection.
Available Values: OFF / BELL / USER BP1 / USER BP2 / USER BP3
Default: OFF
SET MODE ITEM 16: BLUETOOTH P-CODE
Function: Pairing the Bluetooth
®
unit and setting the Pin Code.
Available Values: 0000 ~ 9999
Default: 6111
See page 72 for details.
SET MODE ITEM 17: BLUETOOTH SET
Function: Select the operating mode of the optional BH-1/BH-2 Bluetooth
®
Headset.
Available Values:VOX: PTT / VOX HIGH / VOX LOW,
MODE: MONO / STEREO,
SAVE: ON / OFF,
POWR: ON / OFF
Default: VOX: PTT,
MODE: MONO,
SAVE: OFF
POWR: ON / OFF
VOX: PTT: Activates the Bluetooth
®
function without the VOX feature.
VOX: VOX HIGH: Activates the Bluetooth
®
function with the VOX feature (VOX gain
set to “High”).
VOX: VOX LOW: Activates the Bluetooth
®
function with the VOX feature (VOX gain
set to “Low”).
MODE: MONO: Disable the stereo output to the BH-1 Bluetooth
®
Headset while
receiving the FM Broadcast band.
MODE: STEREO: Enable the stereo output to the BH-1 Bluetooth
®
Headset while
receiving the FM Broadcast band.
SAVE: ON: Activates the Battery Save function of the BH-1/BH-2 Bluetooth
®
Headset. If there has been no signal or key activity for 20 seconds, the
Battery Saver automatically puts the BH-1/BH-2 Bluetooth
®
Headset
to “sleep”, to conserve life. When signal is received or the PTT switch is
pressed, the BH-1/BH-2 Bluetooth
®
Headset will be active again.
SET MODE SELECTION DETAILS
