Filter
Top Products
Using the Rubber Feet and Stacking Clips
1-15
Figure 1-5
Connect The
UTP
Cable To In-House Lan Connection Box
To connect the OfficeConnect Remote to i
n-house
LAN:
1
Connect the UTP cable (not supplied) into RJ45
socket marked LAN on the OfficeConnect Remote.
2
Connect the other end of the cable into the female
socket of the in-house LAN connection box, as shown
in
Figure 1-5
, or directly to a 10BaseT hub port.
Connecting to a Single Workstation
To connect the OfficeConnect Remote to a single
personal computer or workstation:
1
Implement the crossover for the 10BaseT port on
the
OfficeConnect Remote
by setting the MDI/MDIX
switch to MDIX (out).
2
Connect the UTP cable (not supplied) directly into the
RJ45 socket marked LAN on the
OfficeConnect
Remote
.
3
Connect the other end to the 10BaseT socket on the
workstation’s Ethernet adapter.
Rc.bk : RC01.FRM Page 15 Thursday, July 10, 1997 9:53 AM