Filter
Top Products
E-12
CR104
SHIFT
CANCEL
TV
AV
RND
CH
STATUS
iPOD
HDMI NET
RPT
BD
CD
AV
TUN
PVR
VCR
SAT
AMP
MODE
MENU
RTN
BASS
EFFECT
EQ
DIRECT
TRIM
TREBLE
ANGLE/SUBSYNC
SRCH
SETUP TITLE AUDIO SUBT
INFO
FAV + FAV -
HOME
DISP
remote
control
The CR104 remote
e CR104 is a sophisticated ‘universal’ remote control
that can control up to eight devices – including the
BDP300. As it’s a ‘learning’ remote, it can copy almost
any function from an existing single-device remote.
You can also program the CR104 to issue a sequence of
commands (‘macros’) from a single button press.
Select the source key rst
Remember to select a source key before pressing
command buttons – commands vary depending on the
source selected.
To operate the BDP300 from the remote, rst press the
BD source button.
TUN
AVSAT
CD
PVR VCR
AMP
BD
On/Standby
is allows the BDP300 to be put into and taken out of
standby remotely.
Navigation buttons
Arrow buttons allow navigation around the settings
menus on the BDP300 and disc menus.
Conrm a selection by pressing
O
.
Numeric keys, 0–9
Used for data entry. Also gives direct access to
individual tracks on audio CDs.
VOLUME +/–
Adjusts the volume of an Arcam amplier.
MODE
is button activates the Picture-in-Picture Secondary
Video function, where available.
DISP (display)
Press to cycle through the front panel display’s
brightness options (dim to bright, o).
0
/
Press to skip backwards to the previous track(
0
) or
forwards to the next track (
/
).
MENU
Activates the BD ‘popup’ menu or the DVD Video
menu.
RTN
Navigates to the previous menu.
RND
Toggles random (‘shue’) play of chapters/tracks on
and o.
Press
S
followed by
r
to cycle through repeat play
options (chapter, title, disc, etc.).
Source selection and handset conguration
BD
BD input/BD controls
SAT
Satellite decoder input/SAT controls
AV
Television (sound) input/AV controls
TUN
Radio tuner input/TUN controls
AMP
Arcam amplier
PVR
Personal Video Recorder input/controls
VCR
Video Cassette Recorder input/controls
CD
CD player input/CD controls
Press the relevant button once to select input and
recongure the handset.
Press and hold the button until the power LED blinks
once if you wish to recongure the handset without
changing the input.
Advanced controls
ese buttons are described on the next page.
MUTE
Press once to mute an Arcam amplier. Press again (or
use +/ volume) to un-mute.
OPEN
Opens and closes the disc tray.
SETUP
Press SETUP to access the system settings menu.
Playback control
Play (
4
), Pause (
;
) and Stop (
<
).
SHIFT+
;
activates slow playback.
STATUS
Toggles the disc information display.
Press
s
followed by
STATUS
to cycle through the HDMI
output resolutions (only available from the Home
screen).