Filter
Top Products
Important Notes:
• Before connecting the Player to
other equipment, turn off ALL
components to be connected.
• Consult the manual(s) that came
with your other equipment to
properly follow manufacturer’s
guidelines before connecting the
Player.
• To turn off the Player’s screen
during playback on a TV, press
the MODE button on the Player
for about 2 seconds. Press the
MODE button again to reactivate
the screen.
• To not hear the audio from the
Player during playback on a TV,
turn the volume all the way
down.
Connecting to a TV
When the disc is properly inserted,
you will here it click in place.
3. Close the tray.
After a disc has been loaded, the
screen will briefly display the disc type
(DVD, CD etc).
Playback
For most discs, playback will start
automatically after a disc is loaded. If
it does not, press the PLAY/PAUSE
button to start playback.
For DVDs with menus and VCDs
with PBC (Playback Control) the
disc’s own menu will appear. Use the
CURSOR and ENTER buttons on the
Remote Controller to make selections.
If you wish to use the NUMBER but-
tons on the Remote Controller to
make a selection, press the NUMBER
buttons while pressing the SHIFT but-
ton.
If a VCD's menu screen includes more
than one page, use the PREVIOUS
and NEXT buttons to select pages.
For VCDs with PBC, it is also possible
to play a disc without displaying the
menu screen.To play from track 1,
press the 1 button on the Remote
Controller.
For Audio CDs, the first track will
begin to play automatically.
Screen Saver
In order to conserve power when play-
ing Audio CDs, the screen will go dark
automatically after about 2 minutes of
playback. Pressing any button will
reactivate the screen.
You can turn off the screen manually
by pressing the MODE button on the
Player for 2 seconds. Press the
MODE button again to reactivate.
38 27
CONNECTING THE PLAYER
TO A
TV/HOME THEATER SYSTEM