Filter
Top Products
Installing/Replacing the
Remote Controller Battery
1. Use your fingernails as shown to press the
latch (a) in the direction of the arrow, and
pull on the groove (b) to pull out the battery
holder.
2. Remove the old battery, then insert the
new battery into the battery holder with the +
side facing upwards (when the Remote
Controller is face down).
3. Slide the battery holder back into place,
making sure the latch locks.
Important Note:
To prevent leakage of fluid from the battery,
remove the battery when not using the
Remote Controller for periods of one month
or longer. If fluid should leak, remove the bat-
tery, carefully wipe any fluid out of the bat-
tery case, then insert a new battery.
Video Enhance
Video Enhance allows you to adjust
two settings: Brightness and Edges.
Brightness adjusts the screen bright-
ness. Edges enhances the edge
sharpness of images.
1. Press SETUP during playback to
display the Video Enhance screen.
2. Use the Left and Right CURSOR
buttons to adjust the settings. Use
the Up and Down CURSOR buttons
to select Brightness or Edges.
3. When you are done, press the
SETUP button or the ENTER button
to exit Video Enhance.
6-Band Equalizer
(Audio CDs)
1. During playback, press the
SETUP button twice to access the
on-screen Equalizer control.
2. Press the ENTER button repeat-
edly to select one of a number of
presets, or to select the adjustable
equalizer.
If using the adjustable equalizer, use
the CURSOR buttons to select individ-
ual bands and to make adjustments.
46 19