Filter
Top Products
• The volume is set to minimum.
• Headphones are plugged in.
The player may stop operating prop-
erly due to static electricity.
If this occurs, unplugging the power
cord then plugging it back in will usu-
ally resolve the problem.
With liquid crystal displays, a few
picture elements may be black or
shine a particular color.
This is normal.
When I connect the Player to my TV,
the image is distorted and jittery.
Check to make sure the TV system
setting in the Video menu of the
Setup Screen is set properly.
Interference with TV broadcasts
Depending on the reception condition
of the TV, interference may appear
on the screen while you are watching
a TV broadcast and the unit is turned
on. This is not a malfunction; just
ensure that the unit is turned off
when you watch a TV broadcast.
I can’t change the subtitle or audio
language.
Using different languages for subtitles
and audio only works if the languages
are available on the disc.
I cannot access different angles on
a DVD
• The Angles function only works if
angles are available on the disc.
• Angles may only be available for cer-
tain scenes.
Control Strip
1. ON/PLAY/PAUSE button
• Press for 2 seconds to power on
the Player.
• Press to play a loaded disc.
• Press during playback to pause.
Press again to resume.
2. OFF/STOP button
• Press to stop playback.
• Press for 2 seconds to put the
Player into Standby mode.
3. PREVIOUS/NEXT buttons
Press to skip to the next/previous
track or chapter.
4. LCD MODE button
• Press the LCD MODE button to tog-
gle through the LCD control modes.
• Press the LCD Mode button for 2
seconds to turn off the display.
5. – & + buttons
• Press the + and – buttons to adjust
the setting.
See page 40 for instructions on
selecting LCD modes.
6. OPEN button
Press to open the tray.
12 53