Acu-Rite 150 TV Mount User Manual


  Open as PDF
of 24
 
Mounting Requirements SENC 150
Mounting options can be adapted to machine mounting surfaces
usingspacers,standoffs,orlevelingsetscrews.
• Measuringlengthandmechanicalcongurationofyour
machine determine your options.
• Backupsparmountingisanoptionbutnotrequiredforlengths
upto60”.
• Fastenerlengthsdescribedonthispageareincludedwiththe
encoder or the backup spar.
• Lessthan24”:Useendmountingholes. • Over60”:Abackupsparisrequired.
1/4-20x1”BHCS
&scalewasher(supplied)
End hole mounting
1/4-20x1/2”BHCS
&sparwasher(supplied)
Backup spar mounting
• 24”to60”:Useendmountingholeswithcentersupport.
.94 [23.8]
1/4-20x1”BHCS
Typical (supplied)
1/4-20x3/4”SHCS
Scale
washer
Center support
End hole mounting
with center support
M4x8mmSHSS
(supplied)
Supportwasher
8
ACU-RITE
®
516291-21_Ve00_SENC_150.indd 10 10/22/2009 10:00:42 AM
 previous next