Acu-Rite 150 TV Mount User Manual


  Open as PDF
of 24
 
• Routethecableswithslackloopstoallowforaxismotion.
• Secureexcesscablebyfasteningwithclipsorties.
• Attachthelinearencoderconnectorstothereadout.
• Movetheaxisandcomparethedisplaytothemovement.
• Movetheaxis20mm(.79”)tocheckreferencemarkoperation.
• Zerothedisplayandindicator.
• Moveaxistotheendofit’stravelreturntodialzero.
• Readoutshouldreadzero±1count.
Checking Your Installation SENC 150
Placedialindicatorattheendofthemoving
component (scale assembly or reading head).
Repeatability Test
Readout
Counting Test
Connecting
Counting Test:
• Congurethereadout’sencoderanddisplayresolution(see
manual).
• Movetheaxisandcomparethedisplaytothemovement.
• Congurereadoutforsensingreferencemarks.
• Moveeachaxisaminimumof20mm(axisdisplayshouldzero).
Repeatability Test:
• Locateanindicatorononeendoftheencoderandzerothe
readout and indicator.
• Movetheaxisthroughthefulltravelandreturntodialzero.
• Readoutshouldreadzero±1count.
Thesestepswillconrmproperoperationofyourinstallation.
The Counting Test confirms proper electrical operation. The
Repeatability Test checks the installation integrity.
Secureexcess
cable
Provideslack
loops
Attachconnector
14
ACU-RITE
®
516291-21_Ve00_SENC_150.indd 16 10/22/2009 10:00:46 AM
 previous next