Filter
Top Products
43
6.2 PAGE 2: RECEIVE MIDI DRUM NOTES (DRUM IN)
DRUM IN
PAGE
ON V1
SETUP
MIDI
PERFORM
The display shows DRUM IN. This page features two different MIDI input velocity curves
(ON V1 and ON V2). To have the SR-16 receive note messages at its MIDI input, use the
INC/DEC buttons to select ON V1 or ON V2. Select OFF to have the SR-16 ignore note
messages. ON V1 is a normal linear velocity curve, and will not affect MIDI velocity data
being sent by the controller. For keyboards that do not provide a full range of velocity (such
as the Yamaha DX7), ON V2 will allow the drums to be played at full volume without having
to send full velocity from the MIDI controller.
Background Select ON V1 or ON V2 if you're using the SR-16 as an expander module, or want to play real
time drum controllers into the SR-16 as it plays a Pattern or Song. Select OFF if you're using the SR-16 as a drum
machine slaved to a sequencer; when OFF, the SR-16 follows the sequencer timing data but not note data (you
don't want it to play other parts). Note that Clock In (page 5) must be on.
6.3 PAGE 3: TRANSMIT MIDI DRUM NOTES (DRUM OUT)
DRUM OUT
PAGE
OFF
SETUP
MIDI
PERFORM
The display shows DRUM OUT. To have the SR-16 output MIDI note data from pad hits or
when playing a Pattern/Song, use the INC/DEC buttons to select ON. Select OFF if you don't
want the SR-16 to transmit note data.
Background Select ON to send Pattern data into a sequencer for recording, or drive other drum sound
expander modules. If the SR-16 is acting as a drum machine and provides the master clock to a MIDI system, select
OFF so that other devices don't respond to the MIDI note data.