Filter
Top Products
23-EN
AUDIO is selected on the setup menu in step 2.
Operating the External Audio Processor (USER PRESET)
Turn the Double Action encoder(iDA-X200 only) or Rotary
encoder(iDA-X300 only) to select the desired preset number, and then
press
/ENTER.
In normal mode, you can also call up the preset memory of the external
audio processor by pressing and holding “PRESET” for at least 2
seconds. Refer to “Operating the External Audio Processor” on
page 21.
• For the operation of external audio processor, refer to the Owner’s
Manual of the external audio processor you purchased.
Turning Media Xpander ON/OFF
When the Media Xpander is on, and external audio processor is
connected, you can adjust the Media Xpander level.
Setting the MX Level
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, USB memory and
iPod, will be able to reproduce the music clearly even in cars with a lot
of road noise. The initial setting is different depending on the source.
Subwoofer On and Off
The adjustment can also be made by pressing and holding IMPRINT
*
(iDA-X200 only) or SOUND (iDA-X300 only) for at least 2 seconds.
Refer to “Turning Subwoofer ON/OFF” (
page 20).
* For iDA-X200, when connecting IMPRINT audio processor, you
can’t turn the subwoofer ON or OFF by pressing IMPRINT.
GENERAL is selected on the setup main menu in step 2.
Setting of Calendar Display Pattern Switching
(CALENDAR)
You can switch the calendar display pattern to be shown when the time
is displayed.
ex. M/D/Y 12/31/2007
Setting the Clock Display (CLK MODE)
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
Connecting an MP3 Changer (PLAY MODE)
Perform this setting when connecting MP3 changer. MP3 changer can
playback CDs containing both CD and MP3 data. However, in some
situations (some enhanced CDs), playback may be difficult. For these
special cases, you can select playback of CD data only. When a disc
contains both CD or the MP3 data, playback starts from the CD data
portion of the disc.
• Change discs after performing this setting.
Sound (Beep) Guide Function (iDA-X200 only)
This function will give audible feedback with varying tones depending
upon the button pressed.
Turning Mute Mode On/Off (INT MUTE)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
• When Bluetooth is set to ADPT, INT MUTE cannot be set. Refer to
“
Setting the Bluetooth Connection” (page 22).
• When the Bluetooth box is connected, set INT MUTE to OFF.
Setting the AUX+ Mode
You can input the audio of a connected external device, (such as a
portable player) to the iPod Direct connector of this unit, using an iPod
Direct/RCA Interface cable.
An external device and an iPod cannot be connected at the same time.
Audio Setting (Only when external audio
processor is connected)
PRE-1 (Initial Setting) / PRE-2 / PRE-3 / PRE-4 / PRE-5 / PRE-6
OFF (Initial setting) / ON
NON EFFECT / LEVEL 1 / LEVEL 2 / LEVEL 3
SUBW ON (Initial setting) / SUBW OFF
General Setting
M/D/Y (Initial setting) / Y/M/D / D/M/Y
Y : shows the year
M : shows the month
D : shows the day
24H / 12H (Initial setting)
CD-DA (Initial setting) / CD-DA&MP3
CD-DA : Only CD data can be played back.
CD-DA&MP3 : Both CD data and MP3 file tracks can be played
back.
Beep On (Initial setting) / Beep Off
INT MUTE ON / INT MUTE OFF (Initial setting)
AUX+ ON / AUX+ OFF (Initial setting)
AUX+ ON : Set to ON when an external device is connected. If
SOURCE is pressed and AUX+ is selected, the
sound of the external device is input to the unit.
AUX+ OFF : Set to OFF when an iPod is connected.