Filter
Top Products
System Setting Function
1. Press button A for two seconds to enter configuration page.
Press for 2
seconds to enter
configuration page
PRESS 2 SECONDS
FOR CONFIG. PAGE
2. Press button B to select an item: NETWORK SETTINGS, POWER DOWN,
REBOOT SYSTEM, and EXIT.
Click this button
to select an item
to configure
SELECT 1:
NETWORK SETTINGS
Network Settings
Enter NETWORK SETTINGS configuration page and press button B to select one of
the following options. The one marked with * means it is being used for
connection.
• DHCP
DHCP will obtain IP address automatically.
• STATIC IP
Press button A to select STATIC IP. Then configure the IP address.
i. SET STATIC IP
Press button B to enter 0~255 and press button A to set the next number
for the IP address.
ii. SET NETMASK
Follow the above procedure to set the netmask address.
iii. SET GATEWAY
Follow the above procedure to set the gateway address.
iv. SELECT STATIC IP
Press button B to select YES or NO. When YES is selected, you will be
asked to restart the system.
• EXIT
To return to the previous menu.
75