Filter
Top Products
16
RECORD
ALARM / MOTION
TIMER/ SEQ/ TITLE
COMMUNICATION
DISK
SYSTEM
MAIN MENU
GOTO ALARM/ MOTION PAGE
RECORD
ALARM / MOTION
TIMER/ SEQ/ TITLE
COMMUNICATION
DISK
SYSTEM
MAIN MENU
GOTO ALARM/ MOTION PAGE
CH1
CH2
CH3
CH4
SENSITIVITY
MOTION SETTING
MAIN PAGE
: ON
: OFF
: OFF
: OFF
: 3
(8) Press the REC button
6
for 3 seconds
during the scheduled recording to stop it any
time. If you wish to continue the scheduled
recording, press the REC button
6
to
proceed.
Note: You can proceed to start the scheduled
recording from the current time if it is in the
scheduled interlude as soon as setting is
completed, and come out from the menu to
start recording.
Note: If you activate the recording function before
the scheduled recording, the unit will operate
recording as shown in the diagram below and
keep those Images in different files.
03:00 06:00 08:00 12:00 14:00
START END START END
Start Manual
Recording
Timer Manual Timer Manual
3.2.3 Alarm / Motion Recording
Take the following steps to activate the
programmed alarm recording. For the ALM
OPERATION, AUDIO, ALM TYPE, ALM
DURATION, and PRE-ALARM settings,
please refer to section 5.2 for more details.
(1) Press the Setup button
to enter the
MAIN MENU.
(2) Select ALARM / MOTION and press the
Enter button
to enter the ALARM /
MOTION.
(3) Set the desired ALM TYPE, and ALM
DURATION for use. If the audio
capability is required, set AUDIO to ON.
If pre-alarm recording is required, set
PRE-ALARM to ON.
(4) To activate/deactivate the alarm recording,
set ALM OPERATION to ON/ OFF.
(5) To active the motion alarm recording, select
MOTION SETTING and press the Enter
button
15
to enter the MOTION SETTING
page, set MOTION ENABLE TO ON, and
set a suitable SENSITIVITY and REGION
according to the video sources.
ALARM / MOTION
ALM OPERATION : OFF
AUDIO : OFF
ALM TYPE : NO
ALM DURATION : 30 SEC
PRE- ALARM : OFF
MOTION SETTING
MAIN PAGE
ALARM REC ENABLE
ALARM
/
MOTION
ALM OPERATION : OFF
AUDIO : OFF
ALM TYPE : NO
ALM DURATION : 30 SEC
PRE- ALARM : OFF
MOTION SETTING
MAIN PAGE
SET MOTION DETECTION