Approach Tech NVR-2018 DVR User Manual


 
21
4.2.4 Motion Detection
Take the steps detailed below to activate a programmed motion detection. For MOTION
SETTING, as well as its two distinct functions of MOTION ENABLE and SENSITIVITY / REGION,
please refer to section 5.4 for further details.
(1) Press the
Setup button to enter the MAIN MENU.
(2) Select the item termed "
LAN CAMERA" and press the Enter button to enter the
LANCAM SETTING page.
(3) Select the item termed "
MOTION" and push the Enter button to enter the MOTION
SETTING
page.
(4) To activate the motion detection function, set "
MOTION ENABLE" to "ON". To deactivate the
function, set "
MOTION ENABLE" to " OFF" The items termed "OFF" and "ON" switch all the
channels in the
MOTION ENABLE SETTING page off and on respectively as well. If you wish
to select individual channels for viewing, select the item termed "
SET" and activates your
desired channels by pressing them "
ON" while turning the rest "OFF". Confirm your choices
by pressing "
OK". If not, push "CANCEL".
(5) In the
MOTION SETTING page, select the entry termed "SENSITIVITY / REGION" and press
the “>” button
to show all the channels in their order, each in turn. Use the “^” button
and the “v” button
to select a desired channel for setting. Press the Enter button and
set the channel in the
SENSITIVITY / REGION SETTING page. Repeat the process for all
other channels you choose.
(6) To set "
SENSITIVITY" and "REGION" for activation on the SENSITIVITY / REGION page,
choose your degree of sensitivity and then push the
Enter button . At once the legends
"
OK" and "CANCEL" appear at the bottom of the page. Now press the “<” button and the
“>” button
to confirm either "OK" or "CANCEL" respectively.