Filter
Top Products
74
11.5 TCP/IP Configuration setting
Click Start Settings Control Panel Network.
Select TCP/IP, and then click Properties.
Before processing the NVR installation in a WAN, please make sure the Internet
connection works properly. If not, please contact your ISP provider.
If you are using a DHCP server, please select Obtain an IP address automatically. Any
assigned IP address for the connected NVRs must be in the same class type as the server. If
there is no DHCP server, please select
specify an IP address and type in the IP address of
your PC. This IP address must be different from the NVR IP but in the same class type.
NOTE: The IP address of a NVR in a network must be unique to itself as opposed to
those of the other chosen PCs, but in the same class type
11.6 Connection Testing
With the previous settings, follow the instructions below to ensure whether you have established
the connection successfully.
Click Start Programs MS-DOS Prompt